Posted by Shujin Wu on June 6, 2016
[Enter] (CR)
is read#
comments\[Enter]
break long line#!/bin/bash --> ~/.bashrc as env configuration, and use bash to run
# Program:
# Describe the functionality of the script
# History: --> modification history
# 2016/06/06 Author First release
# set env variable
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
script run as a child bash, when it completes, all the variable defined in the child bash will be removed.
run in parent bash, all variable remains.
test -e filename
表示存在否
-e
该『档名』是否存在?(常用)-f
该『档名』是否存在且为文件(file)?(常用)-d
该『档名』是否存在且为目录(directory)?(常用)-b
该『档名』是否存在且为一个 block device 装置?-c
该『档名』是否存在且为一个 character device 装置?-S
该『档名』是否存在且为一个 Socket 文件?-p
该『档名』是否存在且为一个 FIFO (pipe) 文件?-L
该『档名』是否存在且为一个连结档?-r
侦测该档名是否存在且具有『可读』的权限?-w
侦测该档名是否存在且具有『可写』的权限?-x
侦测该档名是否存在且具有『可运行』的权限?-u
侦测该档名是否存在且具有『SUID』的属性?-g
侦测该档名是否存在且具有『SGID』的属性?-k
侦测该档名是否存在且具有『Sticky bit』的属性?-s
侦测该档名是否存在且为『非空白文件』?-nt
(newer than)判断 file1 是否比 file2 新-ot
(older than)判断 file1 是否比 file2 旧-ef
判断 file1 与 file2 是否为同一文件,可用在判断 hard link 的判定上。 主要意义在判定,两个文件是否均指向同一个 inode 哩!-eq
两数值相等 (equal)-ne
两数值不等 (not equal)-gt
n1 大於 n2 (greater than)-lt
n1 小於 n2 (less than)-ge
n1 大於等於 n2 (greater than or equal)-le
n1 小於等於 n2 (less than or equal)test -z string
判定字串是否为 0 ?若 string 为空字串,则为 truetest -n string
判定字串是否非为 0 ?若 string 为空字串,则为 false。注: -n 亦可省略test str1 = str2
判定 str1 是否等於 str2 ,若相等,则回传 truetest str1 != str2
判定 str1 是否不等於 str2 ,若相等,则回传 false-a
(and)两状况同时成立!例如 test -r file -a -x file,则 file 同时具有 r 与 x 权限时,才回传 true。-o
(or)两状况任何一个成立!例如 test -r file -o -x file,则 file 具有 r 或 x 权限时,就可回传 true。!
反相状态,如 test ! -x file ,当 file 不具有 x 时,回传 true# 1. 让使用者输入档名,并且判断使用者是否真的有输入字串?
echo -e "Please input a filename, I will check the filename's type and \
permission. \n\n"
read -p "Input a filename : " filename
test -z $filename && echo "You MUST input a filename." && exit 0
# 2. 判断文件是否存在?若不存在则显示信息并结束脚本
test ! -e $filename && echo "The filename '$filename' DO NOT exist" && exit 0
# 3. 开始判断文件类型与属性
test -f $filename && filetype="regulare file"
test -d $filename && filetype="directory"
test -r $filename && perm="readable"
test -w $filename && perm="$perm writable"
test -x $filename && perm="$perm executable"
# 4. 开始输出资讯!
echo "The filename: $filename is a $filetype"
echo "And the permissions are : $perm"
[]
[ "$HOME" == "$MALL" ] --> correct, 4 spaces are needed
name = "Shujin Wu"
[ $name == "Shujin Wu"] --> incorrect, can't compare Shujin Wu with "Shujin Wu"
$0
, $1
$#
:代表后接的参数『个数』,以上表为例这里显示为『 4 』;$@
:代表『 “$1” “$2” “$3” “$4” 』之意,每个变量是独立的(用双引号括起来);$*
:代表『 “$1c$2c$3c$4” 』,其中 c 为分隔字节,默认为空白键, 所以本例中代表『 “$1 $2 $3 $4” 』之意。echo "The script name is ==> $0"
echo "Total parameter number is ==> $#"
[ "$#" -lt 2 ] && echo "The number of parameter is less than 2. Stop here." \
&& exit 0
echo "Your whole parameter is ==> '$@'"
echo "The 1st parameter ==> $1"
echo "The 2nd parameter ==> $2"
Result:
[root@www scripts]# sh sh07.sh theone haha quot
The script name is ==> sh07.sh <==档名
Total parameter number is ==> 3 <==果然有三个参数
Your whole parameter is ==> 'theone haha quot' <==参数的内容全部
The 1st parameter ==> theone <==第一个参数
The 2nd parameter ==> haha <==第二个参数
echo "Total parameter number is ==> $#"
echo "Your whole parameter is ==> '$@'"
shift # 进行第一次『一个变量的 shift 』
echo "Total parameter number is ==> $#"
echo "Your whole parameter is ==> '$@'"
shift 3 # 进行第二次『三个变量的 shift 』
echo "Total parameter number is ==> $#"
echo "Your whole parameter is ==> '$@'"
[root@www scripts]# sh sh08.sh one two three four five six <==给予六个参数
Total parameter number is ==> 6 <==最原始的参数变量情况
Your whole parameter is ==> 'one two three four five six'
Total parameter number is ==> 5 <==第一次偏移,看底下发现第一个 one 不见了
Your whole parameter is ==> 'two three four five six'
Total parameter number is ==> 2 <==第二次偏移掉三个,two three four 不见了
Your whole parameter is ==> 'five six'
if [ 条件判断式 ]; then
当条件判断式成立时,可以进行的命令工作内容;
fi <==将 if 反过来写,就成为 fi 啦!结束 if 之意!
# 一个条件判断,分成功进行与失败进行 (else)
if [ 条件判断式 ]; then
当条件判断式成立时,可以进行的命令工作内容;
else
当条件判断式不成立时,可以进行的命令工作内容;
fi
# 多个条件判断 (if ... elif ... elif ... else) 分多种不同情况运行
if [ 条件判断式一 ]; then
当条件判断式一成立时,可以进行的命令工作内容;
elif [ 条件判断式二 ]; then
当条件判断式二成立时,可以进行的命令工作内容;
else
当条件判断式一与二均不成立时,可以进行的命令工作内容;
fi
[ "$yn" == "Y" -o "$yn" == "y" ]
上式可替换为
[ "$yn" == "Y" ] || [ "$yn" == "y" ]
case ..... esac
判断case $变量名称 in <==关键字为 case ,还有变量前有钱字号
"第一个变量内容") <==每个变量内容建议用双引号括起来,关键字则为小括号 )
程序段
;; <==每个类别结尾使用两个连续的分号来处理!
"第二个变量内容")
程序段
;;
*) <==最后一个变量内容都会用 * 来代表所有其他值
不包含第一个变量内容与第二个变量内容的其他程序运行段
exit 1
;;
esac <==最终的 case 结尾!『反过来写』思考一下!
case $1 in
"hello")
echo "Hello, how are you ?"
;;
"")
echo "You MUST input parameters, ex> {$0 someword}"
;;
*) # 其实就相当於万用字节,0~无穷多个任意字节之意!
echo "Usage $0 {hello}"
;;
esac
function fname() {
程序段
}
function printit(){
echo -n "Your choice is " # 加上 -n 可以不断行继续在同一行显示
}
echo "This program will print your selection !"
case $1 in
"one")
printit; echo $1 | tr 'a-z' 'A-Z' # 将参数做大小写转换!
;;
"two")
printit; echo $1 | tr 'a-z' 'A-Z'
;;
"three")
printit; echo $1 | tr 'a-z' 'A-Z'
;;
*)
echo "Usage $0 {one|two|three}"
;;
esac
function printit(){
echo "Your choice is $1" # 这个 $1 必须要参考底下命令的下达
}
echo "This program will print your selection !"
case $1 in
"one")
printit 1 # 请注意, printit 命令后面还有接参数!
;;
"two")
printit 2
;;
"three")
printit 3
;;
*)
echo "Usage $0 {one|two|three}"
;;
esac
while [ condition ] <==中括号内的状态就是判断式
do <==do 是回圈的开始!
程序段落
done <==done 是回圈的结束
until [ condition ]
do
程序段落
done
for var in con1 con2 con3 ...
do
程序段
done
users=$(cut -d ':' -f1 /etc/passwd) # 撷取帐号名称
for username in $users # 开始回圈进行!
do
id $username
finger $username
done
for (( 初始值; 限制值; 运行步阶 ))
do
程序段
done
read -p "Please input a number, I will count for 1+2+...+your_input: " nu
s=0
for (( i=1; i<=$nu; i=i+1 ))
do
s=$(($s+$i))
done
echo "The result of '1+2+3+...+$nu' is ==> $s"
[root@www ~]# sh [-nvx] scripts.sh
选项与参数:
-n :不要运行 script,仅查询语法的问题;若语法没有问题,则不会显示任何资讯!
-v :再运行 sccript 前,先将 scripts 的内容输出到萤幕上;
-x :将使用到的 script 内容显示到萤幕上,这是很有用的参数!